Polymer preparation station / polyelectrolyte preparation plant

details to article: 30237

description: 3-chamber polymer preparation station Ultromat ATF 1000 The Ultromat ATF is an automatic polyelectrolyte preparation system. This system can be used to prepare powder polymers and liquid polymers. Concentrations from 0.05 to 1.0 % can be set via the control system. By switching the Ultromat to liquid mode via the key switch in the control cabinet door, the powder dosing unit is switched off and the concentrate pump is activated. The agitator shafts and propellers of the agitators as well as the conveyor unit of the powder dosing unit are made entirely of corrosion-resistant stainless steel. The fill level in the third chamber is monitored by a fill level sensor. The dosing unit is equipped with idle indicators.

technical data Volume  1 m³ (total) Tank level  0.333 m³ (content per chamber - 3 chambers in total) Power  1000 l/h (withdrawal capacity) Connections  (1 x DN 50 overflow connection)   (3 x DN 25 tapping connection)   (1 x 1 " NW - Water inlet)   (DN 15 Liquid concentrate piping) Power  2.6 kW (electrical connection power) Amperage  25 A Accessories  (Agitator 1, 2 and 3) Power  0.55 kW Revolutions per minute  750 1/min Protection rating  55 IP Accessories  (TGD 18 Powder dosing unit) Power  18 kg/h (dosing capacity max.) Length  2631 mm Width  970 mm Height  2250 mm Weight  350 kg (empty weight) Weight  1400 kg (total weight) Video  send request      print view                        Alle Angaben, Bilder, Hinweise und Empfehlungen erfolgen nach bestem Wissen, je- doch ohne Gewähr. Änderungen der technischen Angaben bleiben vorbehalten. Einige, ähnliche Artikel aus unserem derzeitigen Lagerbestand Nr.:29495 gebrauchtes Chemie... Nr.:29503 gebrauchtes Chemie... Nr.:29479 gebrauchtes Chemie... Nr.:30069 gebrauchte Chemika... Nr.:27535 gebrauchte Gasvers... Nr.:29481 gebrauchtes Chemie... Nr.:30237 Polymeransetzstati... Nr.:30061 gebrauchte Chemika... Nr.:27537 gebrauchte Gasvers... Alle Artikel aus der Kategorie anzeigen informations about: feed stations Dosing Dosing generally applies to feeding chemicals or medicines in small quantities into a process fluid or to a living being at intervals or to atmosphere at intervals to give sufficient time for the chemical or medicine to react or show the results. In the case of human beings or animals the word dose is generally used but in the case of inanimate objects the word dosing is used. The word dosing is very commonly used by engineers in thermal power stations, in water treatment or in any industry where steam is being generated. Dosing procedures are also in vogue in textile and similar industries where chemical treatment is involved. In a power station treatment chemicals are injected or fed to boiler and also to feed and make up water under pressure, but in small dosages or rate of injection. The feeding at all places is done by means of small capacity dosing pumps specially designed for the duty demanded. The feeding of chemicals in agriculture has also become common due to technology developments. However agricultural dosing is done by means of hand held pressure spray pumps or similar devices. Sometimes aerial spraying of chemicals by fixed quantities at intervals or dosing is also adopted for agricultural spraying or for atmospheric spraying for eliminating certain types of harmful insects. From Wikipedia, the free encyclopedia

email: mail@tipp-international.de

Internet: www.tipp-international.de